B Paper Adhesive is Clogging up the Rasterization Effect with little white Dots

[JD3Dartist]

When I use the Rasterization Effects with the TransferRIP software, print and press the A and B Sheets together, I can’t seem to Separate the A and B Paper without B Paper Adhesive clogging up some of the holes in the raster effect leaving little unwanted white dots in the design instead of being able to see the Garment Colour (In this case BLK). This ruins the whole design. The Print looks great until I press theA and B Paper, then Slowly Peel it apart.. It looks so terrible that I don’t want to ruin a Tee or Hoodie.

Is there any way to avoid this problem so I can actually use the Rip software with the Laser Dark material?

Two much pressure? To Hot? To Cold? Anybody have any idea how to avoid this issue?

Any help much appreciated 🙂

[Forever_DJ]

Hello JD3Dartist,

Can you please send us an e-mail directly with a filled out technical support formular (https://www.forever-ots.com/wp-content/uploads/2018/08/FORM_Technical-Support-EN.pdf) and also some pictures of the issue, so we can have a look at it and give you further advise?

You can send it to support@forever-ots.com

Thank you!

Kind Regards

[JD3Dartist]

Thanks, will do 🙂

[Author]

Posts