Separate A and B paper *(Laser Dark, low temp)

[Anonymous]

Hi.
When i remove the B-paper from A-paper, i get some small amount of white residues from the B-paper left outside my prints, on the A-paper.
Its not mutch, but some. Tips? Less / more pressure / time?

[Forever_DJ]

@MerkesystemAS
Hi.
After Pressing the A&B media together, you should always cut around the A-Foil, before pressing onto your garment. This will remove any leftover B-Paper.

Please take a look at the Laser-Dark (No-Cut) LowTemp tutorial video: “Step 1: Preparation of the transfer”.

Laser-Dark (No-Cut) LowTemp: Step 1: A-Foil to B-Paper (4-Color Image)

[dkcustomtees]

you are using to much pressure but I do too so what I do is cut the edge of the paper – go around the design
if you dont that white trace will transfer to the shirt and depending on how much and where it can be considered unacceptable

[Author]

Posts